Getting Started with Assa DSR Solution
This page provides links to topics you need to review before you begin installing the LCT Tool, DSR Server Software and SG DSR Manager App.
INTRODUCTION
System Galaxy supports the Assa DSR Solution in System Galaxy v10.5.1 (or higher).
The ASSA DSR Readers do not connect to the Galaxy controller.
To implement the ASSA DSR Solution, you need the following components
-
The Assa LCT Tool is used to configure the ASSA DSR Locks using their initial IP Settings and Security.
-
The Assa DSR Support Tool is used to connect to, confirm, and monitor ASSA WIFI & IP-enabled Locks. This tool is used to configure lock limits and lock alarms that are available.
-
The SG ASSA DSR Manager App is used import to Assa WIFI & IP-enabled Locks, monitor Lock Alarms, create Time Schedules, Authorizations, Door Modes, etc. for the ASSA Readers after the initial installation is completed with the ASSA LCT Tool. This app also allows the administrator to select which alarms are monitored.
System Galaxy is used to enroll cards/users and assign access privileges (DSR Authorizations). SG can also monitor and report ASSA DSR Lock Alarms.
This documentation does not cover how to install System Galaxy. SG Install instructions are found on the DVD1 Help. MORE …
Note that the SG ASSA DSR Manager App is automatically installed on the Galaxy Comm Server. There is no additional install, setup or configuration to run or operate the SG ASSA Manager App. It is located in the GCS\System Galaxy\Utilities
The System Galaxy DSR Manager App lets the System Galaxy Administrator import an unlimited number of DSR-compatible ASSA WIFI & IP Readers. The DSR-compatible Readers can be pre-installed or co-installed at a facility where System Galaxy will provide Access Control; and without requiring the ASSA DSR Readers to integrate with Galaxy hardware.
The System Galaxy DSR Manager App allows the SG Administrator to program the access privileges and manage lock settings and alarm events.
REQUIREMENTS
ABOUT SERVICES
CONFIGURATION & OPERATION OF READERS
GET STARTED CONFIGURING LOCKS & PROFILES
GET STARTED WITH DSR SERVER & SUPPORT TOOL
GET STARTED WITH THE SG-DSR MANAGER APP